The MB10F is an ultra-thin chip bridge rectifier that uses the single-phase conductive characteristics of a diode to convert AC to DC.The device is designed for small devices,low power application circuits,and is ideal for stylish electronic product designs.

　　The MB10F has the same solder pins as the MB6S and can be directly replaced without the need to change the PCB board.It is therefore a great help to the miniaturised high current product manufacturing industry and is ideal for portable application designs that save board space.Passivated Bridge Rectifiers

　　Passivated bridge rectifiers are ideal for automatic placement and feature reliable low-cost construction using precise plastic moulding technology.In power supplies,bridge rectifiers are used to provide the necessary DC voltage to electronic components or devices.

　　Specifications

　　Manufacturer:Diodes

　　Product Category:Bridge Rectifiers

　　Type:Single Phase Bridge

　　Mounting type:SMD/SMD

　　Package/Carton:MBF-4

　　Package Material:Plastic/Epoxy

　　Vf-forward current:800 mA

　　Peak reverse voltage:1000 volts

　　Vf-forward voltage:0.94V

　　Maximum surge current:30A

　　Minimum operating temperature:-55℃

　　Maximum operating temperature:+150°C

　　Number of phases:1

　　Length:4.95mm

　　Width:4.1mm

　　Height:1.6 mm

　　Series:MB10

　　Ir-reverse current:0.2µA

　　Product Category:Bridge Rectifiers

　　Vr-reverse voltage:1000 volts

　　Diode Element Material:Silicon

　　Terminal position:Double

　　Functional characteristics

　　U/L flammability classification of 94V-O for plastic materials

　　High surge overload rating:35A peak

　　Saves printed circuit board space

　　Guaranteed high temperature soldering:260°C/10 seconds/5 lbs.(2.3kg)pull force

　　Terminals:Plated leads solderable per MIL-STD-750,Method 2026

　　Housing:moulded plastic body on passivated connector

　　Polarity:Polarity symbols marked on body dimensions in inches and(millimeters)

　　Housing Material:Moulded plastic.UL Flammability Classification Grade 94V-0

　　Moisture sensitivity:J-STD-020 Class 1

　　Terminals:Lead-free plating(matte tin finish).Solderable according to MIL-STD-202,Method 208

　　Weight:0.08 g(approx.)

　　Pin Layout

　　Pin Size

　　Marking information

　　Main Applications

　　The MB10F is a surface mount glass passivated bridge rectifier with a maximum peak reverse voltage of 1000 volts and an average output current of 0.8 amps.The MB10F devices are suitable for AC to DC bridge full wave rectification in SMPS,LED lighting,adapters,battery chargers,home appliances,office equipment and telecom applications.

　　Note:Check the parameters and pinout of the MB10Fs before replacing them in your circuit.